Conferences

1.     R. Abdul Rahim, R G Green, N. M. Horbury, F. J. Dickin, B. D. Naylor, T. P. Pridmore (1995), “Initial work on tomographic imaging using optical fibres for pneumatic conveyors”, European Concerted Action on Process Tomography (ECAPT), Bergen, Norway.

2.   R. Abdul Rahim, R G Green, N. M. Horbury, F. J. Dickin, B. D. Naylor, T. P. Pridmore (1995), “An investigation into the use of optical fibres to produce on-line particle size information and tomographic images for hydraulic processes”, European Concerted Action on Process Tomography (ECAPT), Bergen, Norway.

3.   R. Abdul Rahim, M.J. Nordin, R G Green, N. M. Horbury,. F.J. Dickin, B. D. Naylor, T. P. Pridmore (1996), “A prototype tomographic imaging system using optical fibres for pneumatic conveyors”, International Conference on Advances in Strategic Technologies 95 (ICAST), UKM, Malaysia.

4.   R. Abdul Rahim,  R G Green, N. M. Horbury,. F.J. Dickin, B. D. Naylor, T. P. Pridmore (1995), “A preliminary result on tomographic imaging system using optical fibres for pneumatic conveyors”, Sensor and Application VI Conference, Dublin, Rep. Of Ireland, 10 - 13 September 1995.

5.   R. Abdul Rahim, , R G Green, N. M. Horbury,. F.J. Dickin, B. D. Naylor, T. P. Pridmore (1995), “Tomographic imaging system using optical fibres for pneumatic conveyors”, Frontiers on Process Tomography Conference, California , USA, November 1995.

6.    R. Abdul Rahim, , R G Green, N. M. Horbury,. F.J. Dickin, B. D. Naylor, T. P. Pridmore (1995), “Tomographic imaging of transparent slurries with particle sizing using optical fibres”, Frontiers on Process Tomography Conference, California , USA, November 1995.

7.   R. Abdul Rahim, R G Green, N. M. Horbury,. F.J. Dickin, B. D. Naylor, T. P. Pridmore (1995), “Optical fibre sensor for process tomography use on pneumatic conveyors”, IEE colloquium on progress in fibre-optic sensors and their applications, November 1995 at Savoy Place, UK.

8.   R. Abdul Rahim, R G Green, N. M. Horbury,. F.J. Dickin, B. D. Naylor, T. P. Pridmore (1995), “Particle size measurement and scattering effect on tomographic imaging system using optical fibres for pneumatic conveyors”, Particle science and technology in the 21st century conference, Tata Research Development & Design Center, Pune, India on 8-21 December 1995.

9.   R. Abdul Rahim, R G Green, N. M. Horbury,. F.J. Dickin, B. D. Naylor, T. P. Pridmore (1995), “Initial investigation into the use of optical fibres to produce on line particle size information and tomographic images for hydraulic processes”, Particle science and technology in the 21st century conference, Tata Research Development & Design Center, Pune, India on 8-21 December 1995.

10.  R. Abdul Rahim, R G Green, N. M. Horbury,. F.J. Dickin, B. D. Naylor, T. P. Pridmore (1996), “Tomographic Imaging System Using Optical Fibres”, Research Seminar, School Of Engineering Information Technology, Sheffield Hallam University on 10th January 1996.

11.  R. Abdul Rahim, , R G Green, N. M. Horbury,. F.J. Dickin, B. D. Naylor, T. P. Pridmore (1996), “Optical fibre sensor for process tomography : Application to pneumatically conveyed solids”, Engineering foundation conference on Pneumatic and Hydraulic Conveying Systems, 21-26 April 1996 at Florida USA.

12.  R. Abdul Rahim, R G Green, Z. Mohd Zain, S. Sulaiman,  S. Ibrahim (1996), “Optical Fibre sensor for process tomography : Concentration profiles inn pneumatic conveyor”, JSPS-VCC 6th Seminar, Kyoto, Japan, 27-28 November 1996.

13.  S. Ibrahim, A.W.I Mohd. Hashim, R. Abdul Rahim (1996), “Development of an Integrated Automatic Meteorological System”, JSPS-VCC 6th Seminar, Kyoto, Japan, 27-28 November 1996.

14.  M. Abdul Ghani, R. Ismail,  K. Hani, R. Abdul Rahim, A. Mohd.  Supaat, A. A’Ain (1996), “The microelectronics industry and the role of University Teknologi Malaysia in human resource development”, Conference on Microelectronics and Information Technology between Malaysia and Italy, 20th October 1996 at Johor Bahru, Malaysia.

15.  R. Abdul Rahim, R.G. Green (1997), “Optical fibre sensor for process tomography”, IFAC/IEEE International Symposium on Artificial Intelligent in Real-Time Control, 22-25 September 1997 at Kuala Lumpur, Malaysia, pp 614-618.

16.  R. Abdul Rahim, R.G. Green (1998), “Preliminary result on optical tomography”, Preliminary result on optical tomography. Dewan Kuliah 5, UTM on 18/3/98

17.  R. Abdul Rahim, R.G. Green (1997), “Case study 1 : Optical Tomography Systems”, Short course for Instrumentation and Process Engineers on Tomography A New Technique For Industrial Instrumentation (Design & Application), 2nd - 3rd December 1997 at Video Conferencing Room, Faculty of Electrical Engineering, Universiti Teknologi Malaysia.

18.  S.Ibrahim, R.G.Green, K.Dutton, R. Abdul Rahim, K.Evans & A.Goude (1999), “Optical Fibres For Process Tomography: A Design Study”, 1st World Congress on Industrial Process Tomography, Buxton, Greater Manchester, April 14-17, 1999.

19.  S.Ibrahim, R.G.Green, K.Dutton, R. Abdul Rahim, K.Evans & A.Goude (1999), “Fibre Optic Lens Modelling for Optical Tomography”, 1st World Congress on Industrial Process Tomography, Buxton, Greater Manchester, April 14-17, 1999.

20.  S.Ibrahim, R.G.Green, K.Dutton, R. Abdul Rahim, K.Evans & A.Goude (1999), “Modelling of optical fibres for process tomography Study”,  International Conference on Robotics Vision and Parallel Processing For Automation (ROVPIA 99), Ipoh July 16-18, 1999.

21.  S.Ibrahim, R.G.Green, K.Dutton, R. Abdul Rahim, K.Evans & A.Goude (1999), “Image reconstruction of particle/droplet Concentration Profiles Using Optical tomography Study”, World Engineering Congress and Exhibition 99, Kuala Lumpur, July 19-22, 1999.

22.  S.Ibrahim, R.G.Green, K.Dutton, R. Abdul Rahim, K.Evans(1999), “Application of Artificial Intelligence in Modelling optical Tomography for the Oil Industry”, The 1st National Conference on Artificial Intelligence Applications in Industry, Kuala Lumpur, October 20-21, 1999.

23.  S.Ibrahim, R.G.Green, K.Dutton, R. Abdul Rahim (2000),” Non-Intrusive optical Tomographic system for Process Measurement”, RESQUA 2000, May 2000, Penang, Malaysia.

24.  S.Ibrahim, R.G.Green, K.Dutton, R. Abdul Rahim (2000),” Cross-correlation optical flow meter for velocity measurement in a hydraulic or a pneumatic conveyor”, RESQUA 2000, May 2000, Penang, Malaysia

25.  S.Ibrahim, R.G.Green, K.Dutton, R. Abdul Rahim (2000), ” Modelling to optimize the design of optical tomography system for process measurement”, Symposium on Process Tomography, 18-19th. May 2000, Warsaw, Poland.

26.  S.Ibrahim, R.G.Green, K.Dutton, R. Abdul Rahim (2000), ” Optical Tomography for multiphase flow”, Symposium on Process Tomography, 18-19th. May 2000, Warsaw, Poland.

27.  S.Ibrahim, R.G.Green, K.Dutton, R. Abdul Rahim (2000),” Modeling optical fibre lens for process tomography”, Symposium on Process Tomography, 18-19th. May 2000, Warsaw, Poland.

28.  S.Ibrahim, R.G.Green, K.Dutton, R. Abdul Rahim (2000),” Application of Optical Tomography in Industrial Process Control System”, TENCON 2000, 24-27 Sept 2000, Kuala Lumpur.

29.  S.Ibrahim, R.G.Green, R. Abdul Rahim (2001),” Optical fibre sensors for measurement of gas bubbles in water using tomographic techniques”, Malaysia Science & Technology Congress 2001, June 2001, Malacca, Malaysia.

30.  S.Ibrahim, R.G.Green, R. Abdul Rahim (2001),” Optical tomography for process measurement and control”, Malaysia Science & Technology Congress 2001, June 2001, Malacca, Malaysia.

31.  R. Abdul Rahim, K.S. Chan (2002), “Optical tomography sensor configuration”, World Engineering Congress (WEC), July 2002, Kuching, Sarawak, Malaysia.

32.  R. Abdul Rahim, K.S. Chan (2002), “Tomographic Imaging Of Pneumatic Conveyor Using Optical Sensor”, World Engineering Congress (WEC), July 2002, Kuching, Sarawak, Malaysia.

33.  R. Abdul Rahim, K.S. Chan (2001),” Applying LED Source in Optical Tomography System for Process Tomography System”, Malaysian Science and Technology Congress 2001 (COSTAM), Melaka.

34.  R. Abdul Rahim, K.S. Chan (2002),” Applying LED Source in Optical Tomography System”, Symposium on Process Tomography II, September 2002, Warsaw, Poland.

35.  R. Abdul Rahim, K.S. Chan (2002),” Sensor Configuration for optical Tomography”, Symposium on Process Tomography II, September 2002, Warsaw, Poland.

36.  S.Ibrahim, R.G.Green, K.Dutton, R. Abdul Rahim (2000), “Optical Tomography for process measurement & Control”, UKACC International Conference on Control 2000, University of Cambridge, UK4-7th September 2000.

37.  S Ibrahim, R Abdul Rahim, R G Green, K Dutton and B Naylor (1999),” Process Tomography using A Hybrid Optical Fibre - Lens System”, Instrument Asia99 Technical Symposium, Singapore, Singapore 1-3 Dec 1999.

38.  S Ibrahim, R G Green, R Abdul Rahim (2000), “A cross-correlation flow meter using optical fibre sensors”, International Conference on Visual Communications and Image Processing 2000, Perth 20-23 June 2000.

39.  R. Abdul Rahim, W.Y. Ng, K.S.Chan (2003), “Composition Determination of Water and Oil Flow Using Ultrasonic Tomography”, Malaysian Science and Technology Congress 2003 (COSTAM), Kuala Lumpur, 23-25 September 2003.

40.  R. Abdul Rahim, M.H. Fazalul Rahiman, K.S.Chan (2003), “Ultrasonic Transmission- Mode Tomography in Water/particles Flow”, Malaysian Science and Technology Congress 2003 (COSTAM), Kuala Lumpur, 23-25 September 2003.

41.  R. Abdul Rahim, Z.C. Tee, K.S.Chan (2003), “Application of Universal Serial Bus (USB) on Data Acquisition System of optical Tomography System”, Conference & Exhibition on Automation & Computer Networks (CACN 2003), Kuala Lumpur, 20th, September – 1st. October 2003.

42.  J. F. Pang, R. Abdul Rahim, K.S.Chan (2004), “Infrared Tomography Sensor Configuration Using Four Parallel Beam Projections”, 3rd International Symposium on Process Tomograph, Lodz, Poland 9-10 September 2004.

43.  J. F. Pang, R. Abdul Rahim, K.S.Chan (2004), “Real Time Image reconstruction System Using Two Data Processing Unit in Optical Tomography”, 3rd International Symposium on Process Tomograph, Lodz, Poland 9-10 September 2004.

44.  J. F. Pang, R. Abdul Rahim, K.S.Chan (2004), “Real Time Mass Flow Rate in Solid-Gas Measurement Using Optical Tomography Technique”, 3rd International Symposium on Process Tomograph, Lodz, Poland 9-10 September 2004.

45.  J. F. Pang, R. Abdul Rahim, K.S.Chan (2004), “Real Time velocity profile Measurement Using Pixel-to-pixel velocity method in optical tomography Instrument”, 3rd International Symposium on Process Tomograph, Lodz, Poland 9-10 September 2004.

46.   L.C. Leong, R. Abdul Rahim, K.S.Chan (2004), “Investigating Multi-projection Technique Using Optical Fibre Sensor in Process Tomography”, 3rd International Symposium on Process Tomograph, Lodz, Poland 9-10 September 2004.

47.   M.H. Fazalul Rahiman, R. Abdul Rahim, K.S.Chan (2004), “Monitoring Liquid/Gas Flow using Ultrasonic Tomography”, 3rd International Symposium on Process Tomograph, Lodz, Poland 9-10 September 2004.

48.  M.H. Fazalul Rahiman, R. Abdul Rahim, K.S.Chan (2003), “Ultrasonic Transmission- Mode Tomography in Water/particles Flow”, Malaysian Science and Technology Congress 2003 (COSTAM), Kuala Lumpur, 23-25 September 2003.

49.  K.T. Chiam, R. Abdul Rahim, K.S.Chan (2004), “Micro Controller Based Signal Generator and LED Controller for Fan Beam optical Tomography System with Remote Computer Control”, 3rd International Symposium on Process Tomography, Lodz, Poland 9-10 September 2004.

50.  K.T. Chiam, R. Abdul Rahim, K.S.Chan (2004), “Digital Sensors for Masking Purpose in Parallel Beam optical Tomography System”, 3rd International Symposium on Process Tomography, Lodz, Poland 9-10 September 2004.

51.  Z.C. Tee, R. Abdul Rahim, K.S.Chan (2004), “Electrical Capacitance Tomography Using Universal Serial Bus Technology”, 3rd International Symposium on Process Tomography, Lodz, Poland 9-10 September 2004.

52.  C.L. Goh, R. Abdul Rahim, K.S.Chan (2004), “Low Cost Microprocessor and Ethernet Controller Based Data Acquisition System in optical Tomography System”, 3rd International Symposium on Process Tomography, Lodz, Poland 9-10 September 2004.

53.  C.L. Goh, R. Abdul Rahim, K.S.Chan (2004), “Application of Ethernet Technology on Data Acquisition System of Optical Tomography System”, 3rd International Symposium on Process Tomography, Lodz, Poland 9-10 September 2004.

54.  W.Y. Ng, R. Abdul Rahim, K.S.Chan (2004), “Water and Oil Flow monitoring System Using Ultrasonic Tomography”, 3rd International Symposium on Process Tomography, Lodz, Poland 9-10 September 2004.

55.  W.Y. Ng, R. Abdul Rahim, K.S.Chan (2004), “Composition Determination of Water and Oil Flow using Ultrasonic Tomography”, S-SPEC (Shell Inter-Varsity Student Paper Presentation Contest) 2004, 14-15 February 2004, Dewan Senat, UTM.

56.  M,H. Fazalul Rahiman, R. Abdul Rahim, K.S. Chan (2005), “Liquid/Gas flow visualization using non-invasive ultrasonic tomography”, 4th  World Congress on Industrial Process Tomography, Aizu, Japan, 5 & 6th.  September 2005.

57.  K.T. Chiam, R. Abdul Rahim, M.F. Rahmat (2005), “Optical Tomography System Using Digital Signal Processor”, 4th  World Congress on Industrial Process Tomography, Aizu, Japan, 5 & 6th.  September 2005.

58.  L.C.Leong, R. Abdul Rahim, K.S. Chan, J.F. Pang (2005), “Multiple fan beam projection technique using optical fibre sensor for tomographic imaging”, 4th  World Congress on Industrial Process Tomography, Aizu, Japan, 5 & 6th, September 2005.

59.  L.C.Leong, R. Abdul Rahim, K.S. Chan, J.F. Pang (2005), “Signal Sample and Hold Circuit to Facilitate Data Acquisition Process in Optical Tomography”, 4th  World Congress on Industrial Process Tomography, Aizu, Japan, 5 & 6th, September 2005.

60.  Z,C. Tee, R. Abdul Rahim, K.S. Chan, J.F. Pang (2005), “Tomographic Imaging : Multiple fan Beam Projection Technique Using Optical Fibre Sensors”, 4th  World Congress on Industrial Process Tomography, Aizu, Japan, 5 & 6th, September 2005.

61.  W.Y. Ng, R. Abdul Rahim, K.S. Chan (2005), “Fluid Mixture of liquids and gas monitoring system using ultrasonic tomography”, 4th  World Congress on Industrial Process Tomography, Aizu, Japan, 5 & 6th, September 2005.

62.  L.C. Leong, R. Abdul Rahim, K.S. Chan, J.F. Pang (2005), “Optical Fibre Sensor System Using Infrared as Light Source”, 4th  World Congress on Industrial Process Tomography, Aizu, Japan, 5 & 6th, September 2005.

63.  M.H. Fazalul Rahiman, R. Abdul Rahim, K.S.Chan (2005), “Liquid/Gas Flow visualization using non-invasive ultrasonic tomography”, 5th International R&D Conference, 15 & 18th February 2005, Bangalore, India.

64.  R. Abdul Rahim, L.C. Leong (2005), “Data Acquisition Process in Optical Tomography: Signal Sample and Hold Circuit”, 1st Conference on Computers, Communications, and Signal Processing, 14-16/11/2005, Kuala Lumpur.

65.  R. Abdul Rahim, L.C. Leong (2005), “Tomographic Imaging : Multiple fan Beam Projection Technique Using Optical Fibre Sensors”, 1st Conference on Computers, Communications, and Signal Processing, 14-16/11/2005, Kuala Lumpur.

66.  R. Abdul Rahim, M.H. Fazalul Rahiman (2005), “Non-Invasive Ultrasonic Tomography : Liquid/gas flow Visualization”, 1st Conference on Computers, Communications, and Signal Processing, 14-16/11/2005, Kuala Lumpur.

67.  M.H. Fazalul Rahiman, R. Abdul Rahim (2005), “Modelling Non-Invasive Ultrasonic Tomography for Industrial Liquid/Gas Flow Application”, MSV'06- The 2006 International Conference on Modelling, Simulation and Visualization Method CSREA Press. Pp. 33-39, Las Vegas, Nevada, USA. June 26-29, 2006, USA ISBN: 1-60132-010-8.

68.  E.J. Mohamad, R. Abdul Rahim, S. Ibrahim (2006), “Real-Time Visualizing Image of Flame by Laser Based Transmission Tomography”, The 2006 International Conference on Real-Time Computing Systems and Applications RTCOMP'0, Monte Carlo Resort, Las Vegas, Nevada, USA (June 26-29, 2006).

69.  M.H. Fazalul Rahiman, T.D. Krishanan, Z. Mohd. Yunus, R. Abdul Rahim, M.T,J. Tajudin (2006), “Infrared Technology for Fruit maturity Identification”, The International conference on Science and Technology (ICSTIE 06) :  Application in Industry and Education, 8 -9 December 2006, Universiti Teknologi Mara.

70.  M.H. Fazalul Rahiman, R. Abdul Rahim, S. Yaacob, M.Tajuddin (2006), “Ultrasonic Tomography Design for Imaging Two-Phase High Acoustic Impedance Mixtures”, 5th  World Congress on Industrial Process Tomography, Bergen, Norway

71.  M.H. Fazalul Rahiman, R. Abdul Rahim (2007), “Forward and inverse problems solution: a review on ultrasonic tomography”, International Conference on Instrumentation, Control & Mecatronics 07, Malaysia, 28-29 Mei 2007.

72.  R. Abdul Rahim, K.S.Chan, M.H. Fazalul Rahiman (2007), “Hardware development for Mobile sensor in Electrical Capacitance Sensor”, International Conference on Instrumentation, Control & Mecatronics 07, Malaysia, 28-29 Mei 2007.

73.  R. Abdul Rahim, L.C Leong, M.H. Fazalul Rahiman (2007), “Optical fibre sensor for tomographic imaging using multiple fan beam projection technique”, International Conference on Instrumentation, Control & Mecatronics 07, Malaysia, 28-29 Mei 2007.

74.  M.H. Fazalul Rahiman, R.Abdul Rahim, S. Yaacob, M. Tajuddin, (2007), “Ultrasonic Tomography Design For Imaging Two-Phase High Acoustic Impedance mixtures”, 5th World Congress on Industrial Process Tomography, Bergen, Norway, June 2007.

75.  M.H. Fazalul Rahiman, R.Abdul Rahim, (2007), “Liquid and gas flow regime identification by ultrasonic computerized tomography”, PSU-UNS International Conference on Engineering and Environment (ICEE 2007), May 10 to May 11, 2007, at Phuket Graceland Resort & Spa, Thailand.

76.  M.H. Fazalul Rahiman, R.Abdul Rahim, (2007), “Development of Oil Contamination Detection System Using Capacitance Technique”, 16th International Symposium on the Application of Ferroelectrics (XVI ISAF 2007) Nara-ken New Public Hall, Nara city, Japan, May 27-31, 2007.

77.  M.H. Fazalul Rahiman, R.Abdul Rahim, (2008), “Ultrasonic Process Tomographic Imaging Sensor: An Approach Utilizing Transceivers Method”, Proceedings International Conference on Computer and Communication Engineering (ICCCE08) Kuala Lumpur, Malaysia on 13-15 May, 2008, Pp. 11471150

78.  M.H. Fazalul Rahiman, Z Zakaria, R.Abdul Rahim, (2008), “Ultrasonic Process Tomographic Imaging Sensor: An Analysis On Transceivers Sensing Method”, 4th  International Colloquium on Signal Processing and its Applications (CSPA) 2008 Kuala Lumpur in March 7-9, 2008. CSPA0818.

79.  M.H. Fazalul Rahiman, R.Abdul Rahim, Z. Zakaria, N.M. Nor Ayob, M.R.Manan (2009), “The Ultrasonic Tomography FrontEnd Hardware Design for Two Phase High Acoustic Impedance Mixtures”, International Conference on Control, Instrumentation and Mechatronics Engineering (CIM '09) Melaka, 2 & 3 June 2009.

80.  M.H. Fazalul Rahiman, R.Abdul Rahim, Z. Zakaria, N.M. Nor Ayob, M.R.Manan (2009), “RealTime Image Reconstruction Using Object Oriented Programming Method”, International Conference on Control, Instrumentation and Mechatronics Engineering (CIM '09) Melaka, 2 & 3 June 2009.

81.  M.H. Fazalul Rahiman, R.Abdul Rahim, Z. Zakaria (2009), “A Comparative Study on Ultrasonic Transceiver Sensing Array for Bubbly Gas Hold Ups”, International Conference on Control, Instrumentation and Mechatronics Engineering (CIM '09) Melaka, 2 & 3 June 2009.

82.  M.H. Fazalul Rahiman, R.Abdul Rahim, Z. Zakaria (2009), “A Comparative Study on Ultrasonic Transceiver Sensing Array for Bubbly Gas Hold Ups”, International Conference on Control, Instrumentation and Mechatronics Engineering (CIM '09) Melaka, 2 & 3 June 2009.

83.  S.Z. Mohd. Muji, R.Abdul Rahim, K.T. Chiam (2009), “Digital Signal Processor in Optical Tomography System”, International Conference on Control, Instrumentation and Mechatronics Engineering (CIM '09) Melaka, 2 & 3 June 2009.

84.  R.Abdul Rahim, Z.C. Tee, J. Pusppanathan, , S.L. S. Yvette (2009), “Low Cost ECT Sensor Electrodes Design”, International Conference on Control, Instrumentation and Mechatronics Engineering (CIM '09) Melaka, 2 & 3 June 2009.

85.  R.Abdul Rahim, K.S. Chan, M.H. Fazalul Rahiman, J. Pusppanathan, , S.L. S. Yvette (2009), “New Sensor Design for Capacitance Tomography”, International Conference on Control, Instrumentation and Mechatronics Engineering (CIM '09) Melaka, 2 & 3 June 2009.

86.  R.Abdul Rahim, K.S. Chan, M.H. Fazalul Rahiman, J. Pusppanathan, , S.L. S. Yvette (2009), “Development of a Distillation Column Scanning Apparatus using Gamma-Ray Tomography”, International Conference on Control, Instrumentation and Mechatronics Engineering (CIM '09) Melaka, 2 & 3 June 2009,

87.  Z. Zakaria, M.H. Fazalul Rahiman, R.Abdul Rahim, A.F. Salleh, H. Jahidin (2009), “Ultrasonic Tomography : The Applications of 32 Transceivers technique in Two Phase Flow Imaging”, International Conference on Control, Instrumentation and Mechatronics Engineering (CIM '09) Melaka, 2 & 3 June 2009.

88.  S.Z. Mohd. Muji, R.Abdul Rahim (2009), “Optical Tomography: Sensor, Projection Array and Image reconstruction Algorithm Investigation”, Singapore 2009 International Conference on Industrial Electronics and Systems Engineering, Singapore, August 26-28, 2009 Conference Proceedings Journal (ISSN 2070-3740).

89.  S.Z. Mohd. Muji, R.Abdul Rahim (2009), “Sensor Selection in Optical Tomography”, Singapore 2009 International Conference on Industrial Electronics and Systems Engineering, Singapore, August 26-28, 2009 Conference Proceedings Journal (ISSN 2070-3740).

90.  M. R Manan, M.H. Fazalul Rahiman, S. Yaacob, R.Abdul Rahim (2009), “Homogeneous and non homogeneous media identification and circuitry design of multiphase ultrasonic tomography”, International Conference on Man Machine Systems (ICoMMS), Universiti Malaysia Perlis, 11-13 October 2009, Perlis.

91.  N.M Nor Ayob, M.H. Fazalul Rahiman, S. Yaacob, R.Abdul Rahim (2009), “Ultrasonic Processing Circuitry Design for Ultrasonic Tomography”, International Conference on Man Machine Systems (ICoMMS), Universiti Malaysia Perlis, 11-13 October 2009, Perlis.

92.  R. Mohd. Zain, R.Abdul Rahim (2009), “Advance Data Logging Software for Gamma Ray Scanning Technology”, International Conference on Control, Instrumentation and Mechatronics Engineering (CIM '09), Melaka, 2 & 3 June 2009.

93.  R. Mohd. Zain, R.Abdul Rahim (2009), “The Development of Column Test Rig Facility for Multiple Defect Studies”, International Conference on Control, Instrumentation and Mechatronics Engineering (CIM '09), Melaka, 2 & 3 June 2009.

94.  S.Z. Mohd. Muji, R.Abdul Rahim (2009), “Criteria for Sensor Selection in Optical Tomography”, 2009 IEEE Symposium on Industrial Electronics and Applications (ISIEA 2009), October 4-6, 2009, Kuala Lumpur, Malaysia.

95.  S.Z. Mohd. Muji, R.Abdul Rahim, M. H. Abdul Wahab (2009), “Image Reconstruction in Process Tomography: Pixel concentration”, 2009 International Conference on Software Engineering and Computer System, October 19-21, 2009, Swiss Garden Resort & Spa Kuantan.

96.  Y.S.S. Yvette, R.Abdul Rahim, R. Mohd. Zain (2009), “Gamma-ray Tomography Instrumentation for investigating corrosion under insulation”, SENSORDEVICES 2010, October 19-21, 2009, Swiss Garden Resort & Spa Kua July 18 - 25, 2010 - Venice/Mestre, Italy.

97.  Z. Zakaria, M.H. Fazalul Rahiman, S.A. Awang, N.F. Mohammad, A.A. Abdullah, R.Abdul Rahim (2010), “Computed Tomography Virtual Lab  Software Application in Biomedical Electronic Engineering Programme at University Malaysia Perlis”, 5th International Conference on X-Rays and Related Techniques in Research and Industries 2010 (ICXRI 2010), Langkawi, Malaysia, 2010.

98.  Z. Zakaria, S. N. Ismail, M.H. Fazalul Rahiman, R.Abdul Rahim (2010), “Analysis of Magnetic Coil Properties in Magnetic Induction Tomography Using FEMM Software”, 5th International Conference on X-Rays and Related Techniques in Research and Industries 2010 (ICXRI 2010), Langkawi, Malaysia, 2010.

99.  N.M. Nor Ayob, S. Yaacob, Z. Zakaria, M.H. Fazalul Rahiman, R.Abdul Rahim (2010), “Simulation on using Cross-Correlation Technique for Two-Phase Liquid-Gas Flow for Ultrasonic Transmission Tomography”, 6th International Colloquium on Signal Processing & Its Applications (CSPA 2010), Malacca, Malaysia, 2010.

100.  N.M. Nor Ayob, S. Yaacob, Z. Zakaria, M.H. Fazalul Rahiman, R.Abdul Rahim (2010), “Improving Gas Component Detection of an Ultrasonic Tomography  System for Monitoring Liquid/Gas Flow”, 6th International Colloquium on Signal Processing & Its Applications (CSPA 2010), Malacca, Malaysia, 2010.

101.  S.Z. Mohd. Muji, R.Abdul Rahim, M.H. Fazalul Rahiman (2010), “Two Microcontrollers Interaction Using C”, The 2nd International Conference on Computer Research and Development (ICCRD 2010), May 7-10, 2010, Mines Welness Hotel Malaysia.

102.  Z. Zakaria, M.H. Fazalul Rahiman, R.Abdul Rahim, (2010), “Sinogram Concept Approach in Image Reconstruction Algorithm of a Computed Tomography System Using MATLAB”, International Conference on Computer Applications and Industrial Electronics (ICCAIE 2010), 5 -7 December, 2010 in Kuala Lumpur, Malaysia.

103.  N.M. Nor, M.H. Fazalul Rahiman, Z. Zakaria, S.Yaacob, R.Abdul Rahim, (2010), “Detection of Small Gas Bubble using Ultrasonic Transmission-mode Tomography System”, 2010 IEEE Symposium on Industrial Electronics and Applications (ISIEA 2010), October 3-5, 2010, Penang, Malaysia.

104.  Z. Zakaria, M.S.B. Mansor, A.H. Jahidin, M. S. Z. Azlan, R.Abdul Rahim, (2010), “Simulation of Magnetic Flux Leakage (MFL) Analysis Using FEMM Software”, 2010 IEEE Symposium on Industrial Electronics and Applications (ISIEA 2010), October 3-5, 2010, Penang, Malaysia.

105.  Z. Zakaria, N.A. Mohd. Yazid, N.H. Jaafar, M.F. Jumaah, M.S.B. Mansor,  R.Abdul Rahim, (2010), “Initial Results on Magnetic Induction Tomography Hardware Measurement Using Hall Effect Sensor Application”, 2010 IEEE EMBS Conference on Biomedical Engineering & Sciences (IECBES 2010), November 30 – December 2, 2010, Kuala Lumpur, Malaysia.

106.  S. Z. Mohd. Muji, R.Abdul Rahim, M.H. Fazalul Rahiman (2010), “Sensitivity Map in Parallel and Fan Beam mode in Optical Tomography”, 6th. World Congress on Industrial Process Tomography (WCIPT 6), Beijing China, 6-9 September 2010.

107.  Z. Zakaria, N. A. Mohd. Yazid, N.H. Jaafar, M.F. Jumaah, M.S.B. Mansor, R.Abdul Rahim, M.H. Fazalul Rahiman (2010), “Initial Results on Magnetic Induction Tomography Hardware Measurement Using Hall Effect Sensor Application”, IEEE EMBS 2010 December 2010, Putrajaya.

108.  E, Mohamad, R.Abdul Rahim (2010), “Multiphase Flow Reconstruction in Oil Pipelines by Portable Capacitance Tomography”, 9th Annual, EEE Conference on Sensors (IEEE SENSORS 2010, ) November 1 - 4, 2010 at the Hilton Waikoloa Village in Waikoloa, Hawaii, USA.

109.  E. Mohamad, R.Abdul Rahim, M.H. Fazalul Rahiman (2011), “Visualization of Recovery Palm Oil Using Portable ECT Imager in Extraction Palm Oil Process”, 4th International Workshop on Process Tomography (IWPT-4), 21st September Wednesday to 22nd September Thursday, 2011, Chengdu, China.

110.  E. Mohamad, R.Abdul Rahim, M.H. Fazalul Rahiman (2011), “Visualization of Recovery Palm Oil Using Portable ECT Imager in Extraction Palm Oil Process”, 4th International Workshop on Process Tomography (IWPT-4), 21st September Wednesday to 22nd September Thursday, 2011, Chengdu, China.

111.  M.H. Fazalul Rahiman, R.Abdul Rahim, (2011), “Liquid/Gas Flow Visualization Using Ultrasonic Tomography”, 4th International Workshop on Process Tomography (IWPT-4), 21st September Wednesday to 22nd September Thursday, 2011, Chengdu, China.

112.  S.Sahlan, R.Abdul Rahim, V. Sreeram (2011), “New Results of Frequency Weighted Balanced Truncation Technique on Schur Decomposition”, 6th IEEE Conference on Industrial Electronics and Applications (ICIEA 2011), June 21 - 23, 2011 in Beijing, China.

113.  E. Mohamad, M.M. Mohamad, R.Abdul Rahim, (2011), “Multiphase Flow Reconstruction  by Portable Capacitance Tomography: PBL Application in  Laboratory Classroom for Engineering Education”, 3rd International Conference on Teaching and Learning (ICTL 2011), November 14 – 16, 2011 in PARKROYAL Hotel, Penang Malaysia.

114.  M.F. Abd. Shaib, E. Mohamad, R.Abdul Rahim, M. A. Jamil. P.L. Leow (2011), “An overview: Effectiveness of different arrangement for electrode guard in Electrical Capacitance Tomography”, Malaysian International NDT Conference and Exhibition 2011, 21-22 November 2011, Port Dickson, Malaysia.

115.  M.J. Pusppanathan, R.Abdul Rahim, N.M. Nor Ayob, M.H. Fazalul Rahiman (2011), “Tomography Image Comparision For Ultrasonic Application in Liquid-Gas Flow Measurement”, Malaysian International NDT Conference and Exhibition 2011, 21-22 November 2011, Port Dickson, Malaysia.

116.  N.M. Nor Ayob, M.H. Fazalul Rahiman, Z. Zakaria, R.Abdul Rahim, S. Yaacob (2011), “Transducer Selection Criteria for Ultrasonic Fan-Beam Projection in Ultrasonic Tomography System”, Malaysian International NDT Conference and Exhibition 2011, 21-22 November 2011, Port Dickson, Malaysia.

117.  S.Z. Mohd. Muji, R.Abdul Rahim, M.H. Fazalul Rahiman, N.M. Nor Ayob (2011), “Simulation on Combination between Parallel Beam and Fan Beam in Optical Tomography in Detecting Phantom Shaping”, Malaysian International NDT Conference and Exhibition 2011, 21-22 November 2011, Port Dickson, Malaysia.

118.  M.H. Fazalul Rahiman, R.Abdul Rahim, H. Abdul Rahim (2011), “Tomographic Reconstruction of a Multi-Attenuation Phantom by Means of Ultrasonic Method”, The 3rd FTRA International Conference on Computer Science and its Applications (CSA 2011), 21-22 November 2011, Port Dickson, Malaysia.

119.  E. J. Mohamad, O. M. Faizan Marwah, R.Abdul Rahim, P.L. Leow (2011), “An Analysis of Sensitivity Distribution Using Two Differential Excitation Potentials in ECT”, International Conference on Sensing Technology - ICST 2011, 28 November to 1 December 2011, Massey University, Palmerston North, New Zealand.

120.  Z. Zakaria, N.A. Mohd. Zain, A.A. Abdullah, S. Yahaya, R.Abdul Rahim, M.S.B. Mansor, A.R. Mohd. Disar (2012), “Simulation of Electromagnetic Field (EM) Focusing Capability on Biological Tissue through the Application of C-type Excitation Coil Screen”, 2012 International Conference on Biomedical Engineering (ICoBE), 27-28 February 2012,Penang.

121.  Z. Zakaria, P.Y. Lee, A.A. Abdullah, R.Abdul Rahim, M.S.B. Mansor, N.M. Nor Ayob (2012), “Simulation Study on Size and Location Identification of Tumors in Liver Tissue through Eddy Current Distribution Analysis”, 2012 International Conference on Biomedical Engineering (ICoBE), 27-28 February 2012,Penang.

122.  S.Z. Mohd. Muji, R.Abdul Rahim, H. Abdul Rahim, M.H. Fazalul Rahiman (2012), “Optical Tomography: The Effect of Interpolation Technique towards Image Performance”, 2012 International Conference on Software and Computer Applications (ICSCA 2012), 9-10 June 2012. IPCSIT vol. 41 (2012).

123.  N. Podari, S.Z. Mohd. Muji, M.H. Jabbar, R. Abdul Rahim, “Implementation of LBP Algorithm by using Matlab Simulink”, 2014 Asia-Pacific Conference on Computer Science and Electrical Engineering (APCSEE 2014), 7-9 November 2014, Kuala Lumpur.

N. Podari, S.Z. Mohd. Muji, M.H. Jabbar, R. Abdul Rahim, “Design and Modelling of LBP Algorithm for FPGA”, International Integrated Engineering Summit 2014 (IIES 2014), 1-4 December 2014, UTHM, Johor.
Comments